Pressure measurement device "Druleck 2"

Info druleck 2

The Druleck 2 is a PC-controlled pressure- and leaktester for catheters and balloons.

show more

The Druleck 2 tests balloons and catheters via gas pressure. The easy and fast handling from the Druleck 2 makes a 100 % inspection possible. The Drucleck has two freely programmable pressure threshold. The first pressure threshold messures the diameter from the balloons and the second makes the maximum pressure test. The pressure is also freely programmable and goes up to 30 bar.

 

The software makes it possible to enter a lot of different parameter for each program. That makes the process very reproductible. The software equates to ISO DIN 13485 and FDA. Including a History, a Logbook and a Operater- and Programm-administration.The history, from the software, makes it possible to check the results from the tests over a long term.

Technical data:  
Pressure:

<= 30 bar, optional 50 bar.

Control: Controlled over Windows PC by including software.
Dimensions without PC: (L/W/H) 320 x 200 x 130 mm, Weight: 6.5 kg
Housing: Clean room-compliant design, top made of stainless steel.
Supply:

110-230V/ 50-60Hz; 24V/70W, USB-Interface.
4 mm AD Pressure tube 30/50 bar filtered.

Scope of delivery: Basic unit, Software, Dongle Operating Instructions in English.
Accessories:

Thickness measurement system, cable and CD,

PC-Win 7/8 for programming.

Miscellaneous: Special sizes and customizations on request.

 

All specifications arsubject to change without notice.

Radial Force Tester "RF-200"

RF-200

The RF-200 can be used in all cases where Quick and simple force measurement is required.

show more

It enables quick recording and evaluation of individual processes in production and in the laboratory. One of its main applications is measuring the radial force of stents for quality assurance.
The measuring object is placed in a heated water bath. The included software starts the measurement. An Init-program considers the force of the water. The start value is determined using a force threshold value. The further process steps in the program are then processed. It is thus possible to cover a wide process window with just one program.

 

Technical data:  
Maximum opening: 40 mm
Maximum length: 200 mm
Force messurement: 25N, Measuring bar via measuring amplifier with tare function, Resolution <1µN
Lienar resolution: < 0,1µm
Drive: Linera spindle
Bath heater:
Low voltage heater 35 W
Control: Controlled over Windows PC by including software.
Dimensions without PC: (L/W/H) 250 x 310 x 290 mm, Weight: 22 kg
Housing: Clean room-compliant design, top made of stainless steel.
Supply: 110-230V/ 50-60Hz; 24V/120W, USB-Interface.
Scope of delivery:

Basic unit, Software, Dongle Operating Instructions English.

Accessories: PC-Win 7/8 for programming.
Miscellaneous: Special sizes and customizations on request.

 

All specifications are subject to change without notice.

Stent inspections system "STENT-VISION 3000"

SV3000 V2R SV-3000 Software.JPG

The STENT-VISION 3000 stent measurement system was developed to automate and enhance the stent quality management.

show more

The strut width and stent length are measured fully automatically. Additionally the wall thickness can be measured manually at any stent position.

 

The stent is recorded optically and the appropriate strut will be searched and measured by using the parameters learned during the teaching process. Every desired stent model can be added to the database system. The teaching process must be performed only once for each stent model. Then it is possible to measure a single stent or the entire lot sequentially.

 

The STENT-VISION 3000 searches the appropriate struts in both directions (rotational and axial) fully automatically. Furthermore it is possible to measure only necessary struts according to the drawings directly at the proximal, medial and distal stent position by using the integrated PMD-Function.

 

The results of every single stent are recorded and are provided in a detailed html-file after the measurement process. Strut widths out of the limits given by the technical drawings are specially marked.

 

With the STENT-VISION 3000 it is possible to use multiple user accounts with different user groups. Only administrators are allowed to perform the system calibration, to teach new stents, to administrate the reports and to create and delete user accounts.

 

The operating status of the STENT-VISION 3000 is indicated by different colors and flashing intervals on both sides and at the front of the system.

 

Available STENT-VISION 3000 - Modules:

  • Module S  (Outer Diameter 1,20 - 1,60 mm, max. Stent Length 54 mm)
  • Module M (Outer Diameter 1,60 - 3,00 mm, max. Stent Length 76 mm)
  • Module L (Outer Diameter 3,00 - 5,00 mm, max. Stent Length 98 mm)
Technical Data:  
Optical resolution: <1,5μm/Pixel
Illuminant: LED
Operating temperature: 20-35°C
Storage temperature: 10-40°C
Humidity: 5-95% (not condensing)
Environment: Dustless environment
Ambient pressure: Atmospheric pressure
Dimensions without PC:

(L/W/H) 400 x 510 x 535 mm, Weight: 55 kg  

Housing: Clean room-compliant design, top made of stainless steel.

Connection:

110-230 V/ 50-60 Hz; 24 V/ 5 A, 2x USB 2.0, 1x IEEE1394

Scope of delivery:

Basic unit, Software, Dongle
Operating Instructions English.

Accessories: PC-Win 7/8 for programming.
Miscellaneous: Special sizes and customizations on request.

 

All specifications are subject to change without notice.

Tension and Friction Tester "DLF-380"

DLF-380

The DLF-380 was developed for testing pull-off and friction forces. The tester can be used as an inline product tester and for development.

show more

The DLF-380 tester is equipped with an automatic clamping device on the right side. This clamp can be used to apply a defined clamping force to two clamping jaws. Thus it is possible to measure stents in the friction on the balloon as well. The pressing force can be set by weights and the surfaces can be quickly replaced by different sizes and shapes. Easier operation with only two buttons enables quick familiarisation in production and easy handling. This device is ideal for many measuring tasks.


For measuring, the part to be tested is placed below the clamp block. Then the plates are lowered carefully with the "Clamp" button. The left side is closed with the mechanic spanner. Pressing the start button builds a tension or pressure on the left side with a carriage, and the force on the right clamp is measured over the path and indicated in a diagram. Comfortable, freely programmable software makes it possible to store and call employee management, batch number and up to 2000 programmes. The device has an error recognition function that indicates when the sample goes from adhesive friction to dynamic friction or if the measuring range or force is exceeded.

 

Technical Data:  
Clamp faces right:

Quick change form for taking up the samples
or fixed clamp. Pressing force can be set through weights.

Spanner left: Mechanic quick spanner can be set
Spanner distance: 380 mm or shorter through additional receptacles
Movement path: Infeed length and speed programmable
Maximum path: 100 mm
Path resolution: approx. 0,5 µm
Force measurement: -+ 25 N
Force resolution: approx. 1 mN (+- 32000 bit)
Control: Controlled over Windows PC by including software.
Dimensions without PC: (L/W/H) 700 x 260 x 200 mm, Weight: 11.5 kg
Housing: Clean room-compliant design, top made of stainless steel.
Connection: 110-230 V/ 50-60 Hz; 24V/70 W, USB-Popt.
Scope of delivery: Basic unit, Software, Dongle, 2 weights, Operating Instructions in English.
Accessories: Weights, PC-Win 7/8 for programming.
Miscellaneous: Special sizes and customizations on request.

 

All specifications arsubject to change without notice.