Crimping machine "Crimpmaster 3"

Crimpmaster 3

The Crimpmaster 3 is a programmable crimping machine for fixed crimping of stents onto balloon catheters.

 

show more

The force is transferred to the stent via a 6-way IRIS diaphragm profile. A plastic tube is located between the stent and the IRIS diaphragm, which transfers the force from the diaphragm to the stent without causing damage. Consequently, even coated stents can be crimped. The force is adjusted electronically by a controller. The iris diaphragm can also be automatically offset by an angle of 30°. This enables a virtually 100% radial force application. The tool width of 13mm enables both short and long stents to be crimped without changing the tool. The feed for long stents > 13mm is regulated by a freely programmable control and 0-10 programs can be simply selected with a selector switch. The maximum travel is approx. 120 mm.

 

Advantages of the machine

  • Crimping of coated stents
  • Regulated force -> Reproducible process
  • Different sizes and lengths without changing the tool
  • Freely programmable process sequence
  • Design suitable for clean room
  • Simple operation
Technical Data:  
Travel range: 125 mm
Control: Controlled over Windows PC by including software.
Dimensions without PC: (L/W/H) 380 x 340 x 260 mm, Weight: 13 kg
Housing: Clean room-compliant design, top made of stainless steel.
Supply: 110-230 V/ 50-60 Hz; 24 V /70 W, USB-Interface. Compressed air 6-8 bar, Dry, free from oil and grease.
Scope of delivery: Basic unit, Software, Dongle, Operating Instructions in English.
Accessories: Crimping tool, PC-Win 7/8 for programming.
Miscellaneous: Special sizes and customizations on request.

 

All specifications arsubject to change without notice.

Annealing Furnaces for Stents "HT-1000"

HT-1000

You can rely on the fact that with the HT-1000 no foreign atoms will be installed in your products during the thermal process and that extremely fine parts are properly processed without depositing any oxide.

show more

The HT-1000 is a high-vacuum annealing furnace that can heat its annealing stock (stents) in a high vacuum to temperatures of up to 1200°C. This prevents oxidation from taking place and as of specific temperatures, oxides are even reduced. An additional benefit is that no foreign atoms become integrated into the product during the thermal process, which would otherwise impair the properties of the material.

 

The vacuum is achieved by a high-vacuum turbo pump, which can attain a final pressure of <10E-5. The dry rotor booster pump ensures that no back diffusion of lubricants develops. And the tried and tested cooling method that is applied in the vacuum enables small particle sizes to be achieved. The integrated venting value enables quick aeration of the system, and, in combination with protective gas, the processing time is minimized. The number of annealed stents pro run depends on size.

 

The process is controlled and monitored by freely-programmable software, which takes all important parameters into account: i.e. different temperature profiles can be run in succession. Windows is known for its easy-to-operate interface and complies fully with the requirements set by FDA and CE regulations. Individual user accounts can be defined with different access rights. Process sequences are able to be saved in a chart and subsequently evaluated, while finished processes are stored in a so-called History File. In addition, modifications, services or other activities can be noted down in the Log Book. Database software is available (not included in scope of delivery) to be used to make backups of the data. A large number of process programs can be created and saved with the software. A further option is support of a host connection.

Technical Data:  
Materials: CoCr, NiTi, Steel; …
Process chamber: Quartz glass
Pipe diameter: useful inner diameter approx. 70 mm, length 200mm
Temperature: Process temperature from 30° to 850°C
 Vacuum:

High-vacuumpump <10E-5 mbar

Control: Programming via Windows PC with the enclosed software.
Dimensions without PC:

(L/W/H) 3200 x 800 x 1250 mm, Weight: 320 kg

Housing: Clean room-compliant design, top made of stainless steel.
Connection 400 V/ 50-60 Hz/ 5 KW, USB-Interface, 4 mm AD compressed air tube 6-8 bar filtered, Process gas 1-3 bar.
Scope of delivery: VA-unit, heating unit, quartz glass and shuttle. Software, Dongle, Operating Instructions in English.
Accessories: Gas flow unit, vacuum valve, Quartz set for CoCr; steel. PC-Win 7/8 for programming.
Miscellaneous: Special sizes and customizations on request.

 

All specifications arsubject to change without notice.

Annealing Furnaces for Stents "HT-1201"

HT-1201

You can rely on the fact that with the HT-1201 no foreign atoms will be installed in your products during the thermal process and that extremely fine parts are properly processed without depositing any oxide.

show more

The HT-1201 is a high-vacuum annealing furnace that can heat its annealing stock (stents) in a high vacuum to temperatures of up to 1200°C. This prevents oxidation from taking place and as of specific temperatures, oxides are even reduced. An additional benefit is that no foreign atoms become integrated into the product during the thermal process, which would otherwise impair the properties of the material.


The vacuum is achieved by a high-vacuum turbo pump, which can attain a final pressure of <10E-5. The dry rotor booster pump ensures that no back diffusion of lubricants develops. And the tried and tested cooling method that is applied in the vacuum enables small particle sizes to be achieved. The integrated venting value enables quick aeration of the system, and, in combination with protective gas, the processing time is minimized. The number of annealed stents pro run depends on size. Approx. 400 items, i.e. 16 mm long stents with a diameter of 1.8 mm can be processed in a single run.


The process is controlled and monitored by freely-programmable software, which takes all important parameters into account: i.e. different temperature profiles can be run in succession. Windows is known for its easy-to-operate interface and complies fully with the requirements set by FDA and CE regulations. Individual user accounts can be defined with different access rights. Process sequences are able to be saved in a chart and subsequently evaluated, while finished processes are stored in a so-called History File. In addition, modifications, services or other activities can be noted down in the Log Book. Database software is available (not included in scope of delivery) to be used to make backups of the data. A large number of process programs can be created and saved with the software. A further option is support of a host connection.

Technical Data:  
Materials: CoCr, NiTi, Steel; …
Process chamber: Quartz glass
Pipe diameter: useful inner diameter approx. 35 mm, length 120 mm
Temperature: Process temperature from 30°C to 1200°C
Vacuum:

High-vacuumpump <10E-5 mbar

Control: Programming via Windows PC with the enclosed software.
Dimensions without PC:

(L/W/H) 2170 x 710 x 1230 mm, Weight: 170 kg

Housing:

Clean room-compliant design, top made of stainless steel.

Connection:

230V/ 50-60Hz/ 2kW, USB-Interface.

Scope of delivery:

VA-unit, heating unit, quartz glass and shuttle. Software, Dongle, Operating Instructions in English.

Accessories:

Gas flow unit, vacuum valve, Quartz set for CoCr; steel. PC-Win 7/8 for programming.

Miscellaneous:

Special sizes and customizations on request.

 

All specifications arsubject to change without notice.

Radial Force Tester "RF-200"

RF-200

The RF-200 can be used in all cases where Quick and simple force measurement is required.

show more

It enables quick recording and evaluation of individual processes in production and in the laboratory. One of its main applications is measuring the radial force of stents for quality assurance.
The measuring object is placed in a heated water bath. The included software starts the measurement. An Init-program considers the force of the water. The start value is determined using a force threshold value. The further process steps in the program are then processed. It is thus possible to cover a wide process window with just one program.

 

Technical data:  
Maximum opening: 40 mm
Maximum length: 200 mm
Force messurement: 25N, Measuring bar via measuring amplifier with tare function, Resolution <1µN
Lienar resolution: < 0,1µm
Drive: Linera spindle
Bath heater:
Low voltage heater 35 W
Control: Controlled over Windows PC by including software.
Dimensions without PC: (L/W/H) 250 x 310 x 290 mm, Weight: 22 kg
Housing: Clean room-compliant design, top made of stainless steel.
Supply: 110-230V/ 50-60Hz; 24V/120W, USB-Interface.
Scope of delivery:

Basic unit, Software, Dongle Operating Instructions English.

Accessories: PC-Win 7/8 for programming.
Miscellaneous: Special sizes and customizations on request.

 

All specifications are subject to change without notice.

"Stent scooter"

Bild 014 Stent Roller 130.JPG

The little helper at work.

show more

With the Stent-Scooter, stents in different sizes can be inspect porblems or edit. Due to the precise mechanics, the stent can be placed precisely in position.

Technical Data:  
Stent diameter: from 1 mm up/ 6 mm up
Stent length: up to 125 mm / up to 205 mm
Miscellaneous: Special sizes and customizations on request.

 

All specifications arsubject to change without notice.

X-Marker Crimping Machine "ROMA 3"

Romarkercrimpmaschine Roma 3

The ROMA 3 is a rotary swaging machine for fine tubes.

show more

The machine works the ring into the tube in steps with varying angles by means of a two-piece tool, which expands on the loading side. The tool diameter is matched to the tube diameter. The starting diameter (opening side) must be greater than the ring diameter. The path and angle can be optimally adapted to the process requirement through free programming.

Advantages of the machine

  • The marker ring is crimped into the tube
  • No transition between marker and tube
  • Reproducible process
  • Different sizes as a result of changing the tool
  • Freely programmable process sequence
  • Quiet running (suitable for clean room)
  • Simple operation
Technical data:  
Control: Controlled over Windows PC by including software.

Dimensions

without PC:

(L/W/H) 350 x 250 x 150 mm, Weight: 7 kg

Housing:

Clean room-compliant design, top made of stainless steel.

Supply:

110-230V/ 50-60Hz; 24V/70W, USB-Interface, 

4 mm AD Pressure tube 6-8 bar filtered.

Scope of delivery:

Basic unit, Software, Dongle,
Operating Instructions in English.

Accessories: Crimping tool for other diameters, PC-Win 7/8 for programming. 
Miscellaneous:

Special sizes and customizations on request.

 

All specifications are subject to change without notice.