manual cutting machine 1-30 mm C 30
Product PDF

C 30

manual cutting machine 1-30 mm

Details:

Thanks to the precise guidance of both blade and tube, the cutting edges are at right angles, the tube remains in its original shape and the length of the tubes remains constant after the process is complete. The tube cutting machine is characterised by it´s easy handling and quick operating procedure.

With the C 30 it is possible to cut tubes with a diameter of approximately 1 mm ranging up to about 30 mm. The cutting process usually lasts about 2 seconds; the complete cutting process depends on the length and quality of the tube. The tubes to be cut are guided through guide bushing, which can be replaced easily. With one guiding bush, ranges of 5 mm are covered on average. The cutting blade is easy and quick to replace. Operation of the C 30 is by means of pneumatic foot pedal, which can be set up at a distance of up to 3 m from the C 30.

Due to the completely closed metal housing and the length of the cutting bushing, injury from operating the cutting process can be practically ruled out. The tube cutter corresponds to the operational safety regulations and CE directives.